DC 24V 12 Watt Wall Adapter Power Supply 2.1mm 5.5mm 1.8m Long cable

DC 24V 12 Watt Wall Adapter Power Supply 2.1mm 5.5mm 1.8m Long cable

  • UL Listed High quality
  • Converts from 100 VAC to 240 VAC wall outlet into a 24 Volt DC plug
  • Output Plug Size 5.5mm * 2.1mm
  • Cable Wire length: 5.9Ft (1.8 meter long)
  • Product No:B00PXKJT8Q
Product No: B00PXKJT8Q Categories: ,

  • Description
  • Inquiry

UL listed high quality 24V 0.5A Power Supply for your LED light and many other purpose use.

Input Voltage: 100-240V AC
Input Voltage frequency: 50hz, 60hz
Output Voltage: 24V
Output Voltage Range: Minimum 22.8V, Maximum 25.2V
Output Current: 500mA
Cord Length: 1.8 meters
Connector: 5.5mm Outside Diameter, 2.1mm Inside Diameter, 10mm Long, Center positive.
DC Cable: 20AWG 2464 L1800mm±30mm Tuning fork in+/out-,SR4*7.
Minimum Efficiency: 78% 115Vac input and output at typical full load.
Over Voltage Protection: The power supply will be auto recovered when faults remove.
Over Current Protection: The maximum constant current would be greater than 0.6A and less than 3A;The power shall be auto-recovery.

Short Circuit:
Output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heat happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed).

Note: Standard power supply tip sizes are (OD – Outside diameter, ID – Inside diameter): 5.5mm OD/2.5mm ID, 5.5mm OD/2.1mm ID. This power supply comes with a 5.5mm OD / 2.1mm ID tip.

Contact Us